Understand the ePSA codes
The ePSA codes are a collection of details that directs the user about the computer system errors. There are many errors that can occur; however, solving such mistakes is very difficult. Basically, the ePSA error code is a number, which contains the error information. Similar codes of error have various explications and solutions. Whether you don’t know the ePSA error codes, or if you haven’t found one yet, then it’s advisable to look into the phone number of Dell tech support. In addition, you can connect with tech experts by dialing 1 800 723 4210.
For this issue the ePSA error code is 2000-0111. This is an issue which occurs in the computer’s motherboard. In fact, it causes failure in the processing unit. By participating in 24/7 customer service, you will gain more information about this issue. The solution to this problem is discussed in brief below.
Upgrade BIOS on your machine.
If updating doesn’t succeed, instead remove the processor or the motherboard.
Battery error on computer.
Here the ePSA error code is 2000-0131; this means the device battery instability. In addition, this error can prevent the machine from starting, because the battery is not working properly.
To combat this issue, you need to shut down your machine first.
Make sure the system’s control code is turned off.
Open the machine case, and remove the plug.
Place the battery in its place once more. In fact, if the mistake still prevails, then remove the battery and count the number of technical supports.
The hard disk drive (HDD) error
The error code now is ePSA 2000-0141, this is the error of an HDD. In this case, the device may complain that it can not find or locate the hard disk drive (HDD). And if the hard disk drive is mounted correctly, the device also can not read it. This mistake happens, if the hard drive is not mounted. If you encounter this problem then consider the resolution below.
When you’ve got a laptop computer, just reset the hard disk drive. When you have a desktop computer, plug the data cable and the hard drive power cord in. Plug all cables in, and make sure they are wired properly.
If the above solution is not working, then remove your hard disk drive.
If you are still experiencing the problem, then do not hesitate to call the Toll Free number.
The Optical Drive Error
Another more common problem is the optical drive, the error code is ePSA 2000-0147 for this case. During this scenario the drive fails to read the disk each time you insert a disk into the optical drive. In addition, your device could inform you there is no Blue ray or DVD drive installed. Below, is there a short instruction on how to solve this problem?
Switch off your machine, and stop any electrical contact.
Identify the defective optical drive, and remove the system and its cables and connections.
Now connect the cables and restart the computer with the optical unit.
If an error ever occurs on the optical drive, call the customer service number for additional assistance.
Comprehending beep patterns for the AMI.
If the beep code for the AMI is one short, then a DRAM failure can result. A two short code, means failure of the parity circuit. Whereas when there’s a RAM malfunction the three short beeps occur. Additionally four short beeps are associated with system timer failure. Find the assistance amount of Technical Support.
Thank you for visiting our website!